FAQs

Can I wear safety stickers on my hard cap?

Can I wear safety stickers on my hard cap?

Safety Stickers should be kept to a minimum; so as not to block any cracks, discoloration, fading or other damage from view. Inspect the cap both inside and out for damage.


Can I wear a ball cap under my hard cap?

Can I wear a ball cap under my hard cap?

No, a ball cap has too much structure and could compromise the performance of our hard cap. However you can wear arc-rated winter liners, cooling bandanas or a sweatshirt hood under the hard hat.


How do I adjust my hard cap?

How do I adjust my hard cap?

Adjust the size from the back of the hat either with the pinlock or the ratchet to what feels comfortable, but secure. Then, looking at the suspension, adjust the height suspension near each lug to position the angle you would like to wear the hard hat.


How I clean my hard cap?

How I clean my hard cap?

When cleaning your hard cap, please remove the suspension from the hat, wipe down with Warm, soapy water and a soft cloth to dry the hard hat. DO NOT use solvents or harsh chemicals to clean the hats.


What standards does Oberon’s hard cap meet?

What standards does Oberon's hard cap meet?

Our Hard Hats meet either the ANSI Z89.1 or CSA Z94.1 Standard (Canadian Caps only) along with meeting the Edison Electrical Institute: Class E Tested to 20,000 volts Class G Tested to 2,200 volts Class C No electrical protection


What temperature range is Oberon’s hard cap tested at?

What temperature range is Oberon’s hard cap tested at?

Oberon’s hard caps are tested to the ANSI Z89.1—2009 which tests head protection from 0 degrees F to 120 degrees F.


Do I need to wear safety spectacles under your face shield?

Do I need to wear safety spectacles under your face shield?

Yes, applicable Standards including NFPA 70E require safety glasses/spectacles to be worn as primary eye protection. An arc-rated face shield or suit hood is designed to protect your face. Both safety glasses and arc-rated protection is required when an arc flash incident is likely to occur. The ANSI Z87.1 standard covers industrial eye and face protective devices and their use in the marketplace. It defines safety glasses and safety/cover goggles as...


What determines which eyewear to choose?

What determines which eyewear to choose?

The NFPA 70E Standard identified safety glasses or safety goggles as selection required “SR”. The risk assessment includes hazard identification. The potential hazards then determine what type of primary eye protection is necessary. Also consider the comfort of the worker. If the spectacles/goggles are not comfortable they won’t be worn properly. The style is important because everyone wants to look their best and wearing safety eyeglasses are no exception. Size, if the eyeglasses don’t fit properly...


What color lens should I choose?

What color lens should I choose?

Clear- works well in indoor and outdoor applications provides excellent light transmission. Amber- works well in low light work areas, works well in high glare areas and where a contrast is needed. Dark Grey- works well for outdoor where sunlight and/or glare can cause problems. Dark Grey lens allows wearer to see colors more clearly.


OSHA states that the wearer should always inspect their PPE before donning, how?

OSHA states that the wearer should always inspect their PPE before donning, how?

Before donning your protective eyewear, make sure it is clean and there are no smudges, dirt or oil obscuring your vision. Check the frame making sure it is clean and in working order, don’t tape or glue your spectacles the structural integrity of the glasses is important to your safety.