Arc Flash Cooling Vest and Cooling Packs

Description

• Meets ANSI /ISEA 125 Level 2 Conformity and Arc Flash PPE Category 4 standards with an arc rating of 41 cal/cm2. Please refer to NFPA 70E or CSA Z462 Standards for specific selection requirements.
• Cool your torso when it is hot outside with flame resistant protection that can be worn under your arc flash suit for increased comfort and safety.
• Cooling packs should be placed in the refrigerator or ice water for approximately 1 hour before use.
• The set includes 8 aqueous non-flammable gel packs.
• Color Khaki
• Size Regular
• Made in the USA

How to use cooling packs:
Place the Oberon Cooling Vest cooling packs in ice water or a refrigerator until they feel cool (approximately 1 hour). Do not freeze the packs as this will make them hard and uncomfortable to wear as well as excessively cold. The cooling packs should provide cooling to the body for approximately two hours. In extreme heat conditions or with heavy exertion, the duration of the packs may be reduced. When worn properly, the packs should feel cool at first. Your body will then acclimate to the temperature and the packs will no longer “feel” cold. They will, however, continue to function as a “heat sink”, pulling heat away from your body core into their mass. You should not feel cold or chilled by a properly functioning Cooling Vest. For extended use, consider keeping a second set in a small cooler filled with ice water, for example, and rotate the two sets.